Gigabyte GA-EP45-UD3P Manual - Page 54

2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals SATA RAID/AHCI Mode jk SATA AHCI Mode l SATA Port0-3 Native Mode Azalia Codec Onboard H/W 1394 Onboard H/W LAN1 j Onboard H/W LAN2 j Onboard H/W LAN kl Green LAN } SMART LAN1 j } SMART LAN2 j } SMART LAN kl Onboard LAN1 Boot ROM j Onboard LAN2 Boot ROM j Onboard LAN Boot ROM kl Onboard SATA/IDE Device Onboard SATA/IDE Ctrl Mode Onboard Serial Port 1 Onboard Parallel Port [Disabled] [Disabled] [Disabled] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Press Enter] [Press Enter] [Press Enter] [Disabled] [Disabled] [Disabled] [Enabled] [IDE] [3F8/IRQ4] [378/IRQ7] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals Parallel Port Mode USB 1.0 controller USB 2.0 Controller USB Keyboard Function USB Mouse Function USB Storage Function [SPP] [Enabled] [Enabled] [Disabled] [Disabled] [Enabled] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SATA RAID/AHCI Mode (Intel ICH10R South Bridge) jk Enables or disables RAID for the SATA controllers integrated in the Intel ICH10R South Bridge or configures the SATA controllers to AHCI mode. Disabled Disables RAID for the SATA controllers and configures the SATA controllers to PATA mode. (Default) RAID Enables RAID for the SATA controllers. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. j Only for GA-EP45-UD3P. k Only for GA-EP45-UD3R. l Only for GA-EP45-UD3. BIOS Setup - 54 -