Gigabyte GA-G1975X Manual - Page 88

English Step 3: Use the ARROW keys on your keyboard to select Intel(R) 82801 GR/GH SATA RAID Controller (Desktop ICH7R/DH)* (Figure 17) and press ENTER. Then the system will load the SATA driver from the floppy disk. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Intel(R) 82801 GR/GH SATA RAID Controller (Desktop ICH7R/DH) Intel(R) 82801 GR/GH SATA AHCI Controller (Desktop ICH7R/DH) Intel(R) 82801 FR SATA RAID Controller (Desktop ICH6R) Intel(R) 82801 FR SATA AHCI Controller (Desktop ICH6R) ENTER=Select F3=Exit Figure 17 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the motherboard driver CD. Step 4: When the screen as shown below appears, press ENTER to continue the SATA driver installation from the floppy disk. The driver installation will be finished in about one minute. Windows Setup Setup will load support for the following mass storage device(s): Intel(R) 82801 GR/GH SATA RAID Controller (Desktop ICH7R/DH) * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit Figure 18 "*" If you set the SATA RAID/AHCI Mode item in BIOS Setup to AHCI mode, please select Intel(R) 82801 GR/GH SATA AHCI Controller (Desktop ICH7R/DH). GA-G1975X Motherboard - 88 -