Gigabyte GA-G1975X Manual - Page 94
Channel Speaker Configurations, Enabling Digital Output
View all Gigabyte GA-G1975X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
English 7.1 Channel Speaker Configurations Front Speaker Out STEP 1 : Connect the 7.1 channel speakers to the Line Out (Front Speaker Out) jack in the back panel and the Rear Speaker Out, Center/Subwoofer Speaker Out, Side Speaker Out jacks on the Surround Kit. Rear Speaker Out Side Speaker Out STEP 2: In the Speaker Selection tab of Creative Speaker Settings, click 7.1 Speakers in the Speaker/Headphone Selection list. After completion, you can click the Channel/Noise button to check whether the speaker selection corresponds to your speaker configuration. Center/Subwoofer Speaker Out Enabling Digital Output The Audio Combo Kit provides the SPDIF Out module which is required for digital output. The SPDIF Out module includes an optical SPDIF Out jack and a coaxial SPDIF Out jack. Follow the steps below to enable digital output support. Optical SPDIF Out Coaxial SPDIF Out Step 1. Connect SPDIF Out module connector to the SPDIF_IO connector on the motherboard. GA-G1975X Motherboard - 94 -