Gigabyte GA-H61M-S2PV Manual - Page 15
CPU_FAN/SYS_FAN Fan Headers, SATA2 0/1/2/3 SATA 3Gb/s Connectors - cpu compatibility
View all Gigabyte GA-H61M-S2PV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3/4) CPU_FAN/SYS_FAN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin system fan header (SYS_FAN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. 1 CPU_FAN 1 SYS_FAN CPU_FAN/SYS_FAN:: Pin No. Definition 1 GND 2 +12V 3 Sense 4 Speed Control DEBUG PORT •• Be sure to connect fan cables to the fan headers to prevent your CPU anDPdOEsBRyUTstGem from overheating. Over- heating may result in damage to the CPU or the system may hang. DEBUG •• These fan headers are not configuration jumper blocks. Do not place a jumPpOeRrTcap on the headers. DEBUG PORT 5) SATA2 0/1/2/3 (SATA 3Gb/s Connectors) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. SATA2 1 7 0 1 71 1 72 3 1 7 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND - 15 - Please connect the L-shaped end of the SATA cable to your SATA hard drive.