Gigabyte GA-J1800N-D2P User Manual - Page 7

Product Specifications, Support for DDR3L 1333 MHz memory modules

Page 7 highlights

1-2 Product Specifications CPU Memory Onboard Graphics Audio LAN ŠŠ Built in with an Intel® Dual-Core Celeron® J1800 SoC (2.41 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. ŠŠ 1 MB Cache ŠŠ 2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory * If only one DDR3L memory module is to be installed, be sure to install it in the SODIMM_1 socket. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3L 1333 MHz memory modules ŠŠ Support for non-ECC memory modules ŠŠ Integrated in the SoC: - 1 x D-Sub port, supporting a maximum resolution of 2560x1600 - 1 x HDMI port, supporting a maximum resolution of 1920x1080 ŠŠ Realtek® ALC887 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. ŠŠ Support for S/PDIF Out ŠŠ Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ŠŠ 1 x PCI slot Storage Interface ŠŠ USB ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Back Panel ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ Integrated in the SoC: - 2 x SATA 3Gb/s connectors Integrated in the SoC: - 1 x USB 3.0/2.0 port on the back panel - 3 x USB 2.0/1.1 ports (1 port on the back panel, 2 ports available through the internal USB header) 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 3Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 2.0/1.1 header 1 x serial port header 1 x debug card header 1 x chassis intrusion header 1 x Clear CMOS jumper 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x HDMI port 1 x parallel port - 7 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

- 7 -
1-2
Product Specifications
CPU
²
Built in with an Intel
®
Dual-Core Celeron
®
J1800 SoC (2.41 GHz)
*
Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
²
1 MB Cache
Memory
²
2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory
*
If only one DDR3L memory module is to be installed, be sure to install it in the
SODIMM_1 socket.
²
Dual channel memory architecture
²
Support for DDR3L 1333 MHz memory modules
²
Support for non-ECC memory modules
Onboard
Graphics
²
Integrated in the SoC:
-
1 x D-Sub port, supporting a maximum resolution of 2560x1600
-
1 x HDMI port, supporting a maximum resolution of 1920x1080
Audio
²
Realtek
®
ALC887 codec
²
High Definition Audio
²
2/4/5.1/7.1-channel
*
To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
²
Support for S/PDIF Out
LAN
²
Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
²
1 x PCI slot
Storage Interface
²
Integrated in the SoC:
-
2 x SATA 3Gb/s connectors
USB
²
Integrated in the SoC:
-
1 x USB 3.0/2.0 port on the back panel
-
3 x USB 2.0/1.1 ports (1 port on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
²
1 x 24-pin ATX main power connector
²
1 x 4-pin ATX 12V power connector
²
2 x SATA 3Gb/s connectors
²
1 x CPU fan header
²
1 x system fan header
²
1 x front panel header
²
1 x front panel audio header
²
1 x S/PDIF Out header
²
1 x USB 2.0/1.1 header
²
1 x serial port header
²
1 x debug card header
²
1 x chassis intrusion header
²
1 x Clear CMOS jumper
Back Panel
Connectors
²
1 x PS/2 keyboard port
²
1 x PS/2 mouse port
²
1 x D-Sub port
²
1 x HDMI port
²
1 x parallel port