Gigabyte GA-K8NE User Manual - Page 43

English 2-7 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software MB Intelligent Tweaker(M.I.T.) CPU Frequency K8 CPU Clock Ratio CPU Spread Spectrum PCIE Clock Robust Graphics Booster DDR voltage control [200] [Default] [Center Spread] [100Mhz] [Auto] [Normal] Item Help Menu Level` KLJI: Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help Incorrect using these features may cause your system broken. For power end-user use only. CPU Frequency 200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz. K8 CPU Clock Ratio Default Set K8 CPU Clock Ratio to CPU factory default. (Default value) x5 1000Mhz ~ x10 2000Mhz Set K8 CPU Clock Ratio from x5 1000Mhz to x10 2000Mhz. CPU Spread Spectrum Disabled Disable CPU Spread Spectrum. Center Spread Set CPU Spread Spectrum to Center Spread. (Default value) PCIE Clock 100Mhz ~ 150Mhz Set PCI-E clock from 100Mhz to 150Mhz. Robust Graphics Booster Select the options can enhance the VGA graphics card bandwidth to get higher performance. Auto Set Robust Graphics Booster to Auto. (Default value) Fast Set Robust Graphics Booster to Fast. Turbo Set Robust Graphics Booster to Turbo. DDR voltage control Please note that by overclocking your system through the increase of the DDR voltage, damage to the memory may occur. Normal Set DDR voltage control to Normal. (Default value) +0.1V Set DDR voltage control to +0.1V. +0.2V Set DDR voltage control to +0.2V. - 43 - BIOS Setup