Gigabyte GA-K8NXP-SLI User Manual - Page 48

English 2-7 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software MB Intelligent Tweaker(M.I.T.) CPU Frequency CPU Spread Spectrum PCIE Clock K8 CPU Clock Ratio Robust Graphics Booster CPU Voltage Control Normal CPU Vcore Core Power voltage control HT-Link voltage control DDR voltage control [200.0] [Center Spread] [100Mhz] [Default] [Auto] [Normal] 1.500V [Normal] [Normal] [Normal] Item Help Menu Level` KLJI: Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help Incorrect using these features may cause your system broken. For power end-user use only. CPU Frequency 200.0~400.0MHz Set CPU Frequency from 200MHz to 400MHz. CPU Spread Spectrum Disabled Disable CPU Spread Spectrum. Center Spread Set CPU Spread Spectrum to Center Spread. (Default value) PCIE Clock 100~150MHz Set PCIE Clock from 100MHz to 150MHz. K8 CPU Clock Ratio This setup option will automatically assign by CPU detection. The option will display "Locked" and read only or will not show up if the CPU ratio is not changeable. Robust Graphics Booster Select the options can enhance the VGA graphics card bandwidth to get higher performance. Auto Set Robust Graphics Booster to Auto. (Default value) Fast Set Robust Graphics Booster to Fast. Turbo Set Robust Graphics Booster to Turbo. CPU Voltage Control Supports adjustable CPU Vcore from 0.800V to 1.750V by 0.025V step. (Default value: Normal) Warning: CPU may be damaged or CPU life-cycle may be reduced when CPU is over-voltage. Normal CPU Vcore Display your CPU normal voltage. Core Power voltage control Normal Set core power voltage as required. (Default value) +0.1v Increase core power voltage +0.1V. +0.2v Increase core power voltage +0.2V. +0.3v Increase core power voltage +0.3V. GA-K8NXP-SLI Motherboard - 48 -