Gigabyte GA-M61SME-S2 Manual - Page 21
SATAII 0 / SATAII 1 SATA 3Gb/s Connectors, FDD FDD Connector - driver
UPC - 818313003409
View all Gigabyte GA-M61SME-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6) FDD (FDD Connector) This connector is used to connect a floppy disk drive. The types of floppy disk drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure to locate pin 1 of the connector and the floppy disk drive cable. The pin 1 of the cable is typically designated by a stripe of different color. 33 1 34 2 7) SATAII 0 / SATAII 1 (SATA 3Gb/s Connectors) SATA 3Gb/s can provide up to 300 MB/s transfer rate. Please refer to the BIOS setting for the SATA 3Gb/s and install the proper driver in order to work properly. 7 1 SATAII 0 SATAII 1 1 7 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND - 21 - Hardware Installation
Hardware Installation
- 21 -
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
7)
SATAII 0 / SATAII 1 (SATA 3Gb/s Connectors)
SATA 3Gb/s can provide up to 300 MB/s transfer rate. Please refer to the BIOS setting for the
SATA 3Gb/s and install the proper driver in order to work properly.
6)
FDD (FDD Connector)
This connector is used to connect a floppy disk drive. The types of floppy disk drives supported
are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be
sure to locate pin 1 of the connector and the floppy disk drive cable. The pin 1 of the cable is
typically designated by a stripe of different color.
1
2
33
34
1
7
7
1
SATAII 0
SATAII 1