Gigabyte GA-M61SME-S2 Manual - Page 35
HDD S.M.A.R.T. Capability, Away Mode, Init Display First, Frame Buffer Size, Onboard GPU
UPC - 818313003409
View all Gigabyte GA-M61SME-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed. Enabled Enable HDD S.M.A.R.T. capability. Disabled Disable HDD S.M.A.R.T. capability. (Default value) Away Mode Disabled Disable this function. (Default value) Enabled Enable Away Mode in Windows XP Media Center operating system. (Away Mode: Enables the system to silently perform unattended tasks while in a low-power mode that appears off. ) Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard. PCI Slot PEG Set Init display first to PCI. Set Init display first to PCI Express VGA card. (Default value) Onboard VGA Set Init display first to Onboard VGA. Frame Buffer Size 32M Set frame buffer size to 32 M. 64M Set frame buffer size to 64 M. (Default value) 128M 256M Set frame buffer size to 128 M. Set frame buffer size to 256 M. Disabled Disable this function. Onboard GPU This item allows the user to decide when to activate the onboard VGA function. Enable If No Ext PEG Activate the onboard VGA only when no PCI Express VGA card is installed. (Default value) Always Enable Always activate the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. - 35 - BIOS Setup