Gigabyte GA-M61SME-S2 Manual - Page 42

2-6 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2007 Award Software PC Health Status Reset Case Open Status Case Opened Vcore DDR2 1.8V +3.3V +12V Current System Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed System Warning Temperature CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning CPU Smart FAN Control CPU Smart FAN Mode [Disabled] Yes OK OK OK OK 25oC 40oC 3183 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Auto] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Reset Case Open Status Disabled Enabled Don't reset case open status. (Default value) Clear case open status at next boot. Case Opened If the case is closed, "Case Opened" will show "No". If the case have been opened, "Case Opened" will show "Yes". If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save CMOS, your computer will restart. Current Voltage(V) Vcore/DDR2 1.8V/+3.3V/+12V Detect system's voltage status automatically. Current System/CPU Temperature Detect system/CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/system fan speed status automatically. System/CPU Warning Temperature 60oC / 140oF Monitor system/CPU temperature at 60oC / 140oF. 70oC / 158oF 80oC / 176oF 90oC / 194oF Disabled Monitor system/CPU temperature at 70oC / 158oF. Monitor system/CPU temperature at 80oC / 176oF. Monitor system/CPU temperature at 90oC / 194oF. Disable this function. (Default value) CPU/SYSTEM FAN Fail Warning Disabled Enabled Disable the CPU/system fan fail warning function. (Default value) Enable the CPU/system fan fail warning function. GA-M61SME-S2 Motherboard - 42 -