Gigabyte GA-M68MT-S2 Manual - Page 26

2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Integrated Peripherals NV Serial-ATA Controller } Serial-ATA RAID Config Onboard Audio Function On-Chip MAC Lan Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA USB Controllers USB Legacy Function USB Storage Function [All Enabled] [Press Enter] [Auto] [Auto] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 [Enabled] [Enabled] [Enabled] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults NV Serial-ATA Controller Enables or disables the integrated SATA controller(s). You can select whether to enable all SATA controllers or only the first SATA controller. (Default: All Enabled) Serial-ATA RAID Config CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Serial-ATA RAID Config NV SATA RAID function x NV SATA 1 Primary RAID x NV SATA 1 Secondary RAID x NV SATA 2 Primary RAID x NV SATA 2 Secondary RAID [Disabled] Enabled Enabled Enabled Enabled Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults NV SATA RAID function Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to configure RAID for individual SATA channel. (Default: Disabled) NV SATA 1 Primary RAID Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled) NV SATA 1 Secondary RAID Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled) NV SATA 2 Primary RAID Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled) NV SATA 2 Secondary RAID Enables or disables RAID for the second channel of the second integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled) BIOS Setup - 26 -