Gigabyte GA-MA790FX-UD5P Manual - Page 28
SATA2_0/1/2/3/4/5 SATA 3Gb/s Connectors, Controlled by AMD SB750, Yellow
View all Gigabyte GA-MA790FX-UD5P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
8) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by AMD SB750, Yellow) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The AMD SB750 controller supports RAID 0, RAID 1, RAID 5, RAID 10 and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. Pin No. Definition SATA2_0 7 SATA2_2 SATA2_4 1 1 GND 2 TXP 3 TXN 4 GND 7 SATA2_1 SATA2_3 1 SATA2_5 5 RXN 6 RXP 7 GND Please connect the L-shaped end of the SATA 3Gb/s cable to your SATA hard drive. • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires at least four hard drives and the total number of hard drives must be an even number. GA-MA790FX-UD5P Motherboard - 28 -