Gigabyte GA-MA790FX-UD5P Manual - Page 41

2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) CPU Clock Ratio CPU NorthBridge Freq. (Note) CPU Host Clock Control x CPU Frequency (MHz) PCIE Clock (MHz) HT Link Frequency Set Memory Clock x Memory Clock  DRAM Configuration ******** System Voltage Optimized System Voltage Control x DDR2 Voltage Control x SB/HT Voltage Control x NB/PCIe/PLL Voltage Control x CPU PLL Voltage Control x DDR VTT Voltage Control x NB Voltage Control x CPU NB VID Control (Note) x CPU Voltage Control ******** [Auto] 2700 Mhz [Auto] 2000 Mhz [Auto] 200 [Auto] [Auto] 2600 Mhz [Auto] x2.66 533Mhz [Press Enter] [Auto] Auto Auto Auto Auto Auto Auto Auto Auto Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Normal CPU Vcore CMOS Setup Utility-Copyright (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) 1.3500V Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately alter ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. (Note) This item is present only if you install a CPU that supports this feature. - 41 - BIOS Setup