Gigabyte M1005 Manual - Page 18
Connecting the AC Adapter - specification
View all Gigabyte M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Replacing the Battery The battery will gradually weaken over time. We recommend that you replace your battery when you notice a significant decrease of battery capacity. 16 To change the battery pack, follow the steps below: 1. Turn off the computer. 2. Close the lid and flip the computer over. 3. Slide the battery latch. Continue to hold it until the battery is removed. 4. Make sure the replacement battery is properly oriented before inserting it into the battery compartment. Note: The battery can not be charged to 100% when remaining battery is no less than 95%. It is based on the supplier's advice, and to extend charging frequency and battery life. Maintenance of the AC Adapter Do not connect the adapter to any other device. Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and keep cables away from all traffic. When unplugging the power cord, do not pull on the cord itself but on the plug connector instead. If you are using an extension cord, make sure that the devices plugged onto the cord do not exceed its total capacity. Furthermore, the devices plugged into the electrical outlet shall not exceed the fuse's total ampere rating. Please verify power voltage before connecting the electrical cord to the power outlet. If you are uncertain of its power specification, please consult with your local vendors or power company for more details. 1.13 Connecting the AC Adapter The AC adapter converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and outputs power at 12V, (12V, 3.0A for M1005), allowing you to use your Booktop M1005 computer in almost any region globally. CAUTION: Use only the AC adapter and the power cord we recommend. Using the wrong adapter may damage your computer. We assume no responsibilities for damages arising from misuse of AC adapters. 1 3 2 To properly connect the adapter, follow the steps as below: 1. Connect the power cord to the AC adapter. 2. Connect the AC adapter to the DC power port of your computer. 3. Connect the AC adapter power cord to an AC outlet.