Haier 21F6D User Manual - Page 5

PREPARING FOR OPERATIONS Figure A Antenna Antenna connection Connect an antenna to the antenna socket on the TV set, we recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75 ),insert the antenna plug (see figure C) into 75 socket (see figure A). 2.If you use a twin-lead cable(300 ),please shape the cable as figure D, and connect the leads to antenna adapter and then insert the Figure B antenna adapter into the 75 socket (see figure B). 75-300¦¸ Antenna adapter Power source wire connection Antenna cable with a plug Antenna feeder Insert the power plug into AC outlet. Install and replace batteries of the remote control unit: 1.Place the remote control unit with the face down, then open the battery cover of the unit. 2.Place the two"AA"size batteries, matching Figure C Figure D the + and - signs on each battery to the + Coaxial cable(75 ) twin-lead cable(300 ) and -signs of the battery compartment. 3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Replace the two old batteries at the same time. (4)Don't use charge battery (Ni-cd )and don't mix battery type. (5)Don't throw your batteries into a fire. Dispose of your batteries in a required place. 3