Haier 21T8D User Manual - Page 3

BASIC FEATURE 2 ●I C bus control ●218 programs stored ●Display full functions on the screen and infrared remote control ●Multi-picture modes and sound modes selection ●Auto searching, function selecting and program number skipping ●Multi function timer ●Progammes scanning ●Game, multi-function lock ●Stage curtain for open and close effect TECHNICAL SPECIFICATION 1.POWER SUPPLY: 2.COLOUR SYSTEM: 3.AUDIO SYSTEM: 4.CRT: 5.ANTENNA INPUT : 6.SOUND OUTPUT POWER: 7.POWER CONSUMPTION: 8.NET WEIGHT(kg): 9.NET DIMENSION(mm): See rating plate PAL SECAM NTSC4.43/3.58(AV) B/G D/K 21" 75Ω Standard Coaxial Cable 3W See rating plate 21.5 600 x 475 x 460 Supplied accessories: Infrared remote control handset 1 Battery(AA) 2 Operating instruction 1 Design and specifications are subject to change without notice. 2 PREPARING FOR OPERATIONS Figure A Antenna connection Antenna Connect an antenna to the antenna socket on the TV set, We recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75Ω),insert the Y IN Cb Cr 3 IN S-VIDEO VIDEO L AUDIO R antenna plug (see figure C) into 75Ωsocket OUT (see figure A). 2.If you use a twin-lead cable(300Ω),please Figure B shape the cable as figure D, and connect the leads to antenna adapter and then insert the 75-300Ω antenna adapter into the 75Ωsocket.(see Antenna adapter figure B) Antenna cable with a plug Antenna feeder Power source wire connection Insert the power plug into AC outlet. Figure C Install and replace batteries of the Figure D remote control unit: Coaxial cable(75Ω) twin-lead cable(300Ω) 1.Place the remote control unit with the face down, then open the battery cover of the unit. 2.Place the two"AA"size batteries, matching the + and - signs on each battery to the + and -signs of the battery compartment. 3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Replace the two old batteries at the same time. (4)Don't use charge battery (Ni-cd )and don't mix battery type. (5)Don't throw your batteries into a fire. Dispose of your batteries in a required place. 3