Haier 21T8D User Manual - Page 5

REMOTE CONTROLLER GUIDE 1 TV/AV 2 1 2 3 SCAN 4 5 6 LOCK 3 7 8 9 SYSTEM -/-- 0 BAR DISPLAY 4 SELC.PIC SELC.VOL 5 CH+ 20 MENU VOL- VOL+ 6 FIRE BACK PRE CH- 7 MIX RESTART EXIT FIRE LIGHT 8 SHORT WIDE NARROW SECOND 9 Remote control functions 1 TV/AV exchanging button 18 2 Mute button 3 Numeric button 17 4 One/two/three digital buttons 5 Picture mode selection 16 6 Volume up/dwon button 15 7 Recall 8 Calendar/game selection 14 13 9 Second timer button 12 10 Programme promote 10 11 Volume mode selection 11 12 Display 19 13 Invalid button 14 System preset button 15 Lock preset button 10 16 Scan button 17 DC standby button 18 Sleep timer 19 Program number up/down button 20 Menu button Note :Because there is no bar function in the TV,"LONG", "SHORT", "WIDE", "NARROW" buttons are invalid. 6 POWER SUPPLY 1.Power supply (switch on/off to set main power supply). Press power switch button and the set shall be under normal receiving condition. Press it again and the power shall be off. 2.Standby button (remote controller power supply). Press the button and the set enters standby condition, press it again and the set enters normal receiving condition. TUNING PROCEDURE 1.Preparation Connect the aerial and power supply wire, press power switch button, the power indicator will light after a few seconds. 2.Auto-search The TV set will automatically search all TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY SELECT ADJUST programs, after the search is finished, all fine tuned programs will be stored automatically. (1)Press [MENU] button, let TUNING menu display on the screen. (2)Press [-CH+] button to select AUTO MEMORY item. (3)Press [VOL+] button, the TV set will begin to search programs from program number 0. After the search is finished, program number 0 will display on the screen. (4)During auto-search, if you want to stop searching, press [VOL-] button. 3.Semi-Auto search You can preset the program you need to the pointed channel. 7