Haier AB12CS1ERA Service Manual - Page 59
Outdoor Unit Installation
View all Haier AB12CS1ERA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
>_]]VbTZR\ _^UZdZ_^Vb 5. INSTALL THE DRAIN HOSE Select whether the drain hose will be connected to the left or right side.(Fig.3) Insert the drain hose into the drain pan, then secure the drain hose with a nylon fastener.(Fig.6) Wrap the insulation (drain hose)around the drain hose connection.(Fig.7) Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor unit.(Fig.18) Fig. 18 Remove the hole cover. OUTDOOR UNIT INSTALLATION CONNECTING THE PIPING 1. FLARE PROCESSING (1) Cut the connection pipe with pipe cutters so that the pipe is not deformed. (2) Holding the pipe downward so that cuttings cannot enter the pipe, remove the burrs. (3) Remove the flare nut from the indoor unit pipe and outdoor unit and insert the flare nut onto the pipe, and flare with a flaring tool. 2. BENDING PIPES The pipes are shaped by your hands. Be careful not to collapse them. Arrange the drain hose lower than this portion OK Drain hose Fig. 21 NO Fig. 19 Piping hole VT wire hole Base (Bottom) Intake grill Pass the drain hose through here Cut the grill VT wire OK NO Extend the pipe by unwinding it Drain hose -58-