Haier BD-314 User Manual - Page 6

Installation LOCATION & CLEARANCES The freezer is designed for free-standing installation only. It should not be recessed or built-in. Make sure there is ample clearance around your freezer for proper air circulation and ease in installation and maintenance. The freezer should not be exposed to rain. 800mm t 100mm 100mm Install the freezer in a well-ventilated area, away from direct sunlight and any other heat sources like stoves, ovens and exhaust vents. Air must circuit freely around the freezer 6 PROPER GROUNDING Important-for personal safety, this appliance must be properly ground. In the event of an electric short circuit, grounding reduces the risk of electric shock by providing an escape wire or the electric current, This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Consult a qualified electrician or service center if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not, under any circumstances, cut or remove the third (ground)prong from the power cord. 0 00 0 • Make sure the freezer is on a stable surface to avoid noise and vibration. Moving Before moving your freezer: • Take out all the food. • Turn the temperature control dial to "1" (Lowest) position and unplug your freezer. • Ensure all detachable and moveable parts inside the freezer. • Always keep your freezer in its upright position while moving and during transport. • Before moving you freezer,must pull out the plug and loop the power cord position safely to avoid damaging the cord during the move. • Clean and dry the inside of your freezer. Keep your freezer secured during transport to prevent unnecessary movement. Cover your freezer with a blanket to protect the paint finish from scratches. ...argaManreiRrallr-t Mira For reinstallation, please refer to the Installation Procedures of this Use and Care Guide. 4 9