Haier ESA418J User Manual - Page 9

NOTE: Dots are Braille text for sight impaired Remote control may differ in appearance. ON/OFF MODE SPEED TIMER TEMP/TIME TEMP/TIME Using the Remote Control Temperature (1) Press the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C). TEMP/TIME (2) Press the TEMP/TIME down arrow button to lower the temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go down 1ºF until it reaches 61°F (16°C). TEMP/TIME NOTE: One CR2025 battery (included) powers the remote control. Replace battery after 6 months of use, or when the remote control starts to lose power. Power Press ON/OFF to turn on the air conditioner. ON/OFF Mode Press MODE to choose Fan, Cool, Energy Saver or Dehum. MODE Speed Press SPEED to choose High, Med or Low. SPEED Timer To set the Timer for a 1-hour to 24-hour delay before the air conditioner is turned off (the air conditioner must be On): 1. Press TIMER. Timer OFF indicator light on the air conditioner control panel will flash. TIMER 2. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours. 3. After 5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on. To set Timer to turn on the air conditioner, keeping previous settings: 1. Turn on the air conditioner. 2. Press TIMER. Timer On indicator light on the air conditioner control panel will flash. 3. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours. 4. After 5 seconds, Timer On indicator light on the air conditioner control panel will remain on. To set Timer to turn on the air conditioner, changing the previous settings: 1. Turn on the air conditioner. 2. Adjust the mode to Fan, Cool, Energy Saver or Dehum. 3. For Fan, Cool or Energy Saver mode, adjust the fan speed to High, Med or Low. 9