Haier ESD210 User Manual - Page 11

English Note: At the end of the wash program the machine will beep for few times to indicate that the wash process has been completed. All the lights except for the power indicator light will turn off 5) Remove all washed items and reload if you would like to start a new wash process or press the "POWER" button to turn the unit "OFF" at the end of wash process. Once the unit is in the "OFF" position, the power indicator light shuts off. Understanding the Convection Fan Dry Process: • The convection fan activates automatically after each wash program to start the drying cycle. During the drying process the fan removes hot moist air to condensation chamber. The condensed hot moist air cools down ito form water and is exhausted through the drainpipe. • With this type of exhaust design in your dishwasher, there is no need to worry about your cabinets getting damaged, unlike other conventional dishwashers with a front vent opening to exhaust hot moist air which may easily spread around the cabinets and cause damage. Upper Wash Option: This option can be used with ALL wash programs. Note: You can select this option when you want to wash small load of dishware and glassware. You must load items in the "UPPER RACK ONLY." The lower rack must be completely empty when using this option. During the wash process, the water flow from the upper sprayer is concentrated only on the wash load in the upper rack. Note: You must use "ONE HALF" the amount of detergent that you would normally use for full a load. This option saves detergent, water and energy. Follow the steps below to select the wash option for each program. WASH OPTION SELECTING PROCEDURE Pots & Pan Wash Selected Wash Option(s) Type Sanitize Wash Heated Dry Upper Wash Sanitize Wash & Heated Dry Sanitize Wash & Upper Wash Heated Dry & Upper Wash Sanitize Wash, Heated Dry & Upper Wash Procedure Press SELECT button 1 time Press SELECT button 2 times Press SELECT button 3 times Press SELECT button 4 times Press SELECT button 5 times Press SELECT button 6 times Press SELECT button 7 times 10