Haier ESD210 User Manual - Page 28

English Dishware is chipped: • This is due to poor loading or overloading. You need to be careful when loading. Do not overload. You need to place the glassware securely against the pins. Make sure delicate items are on the side rack. We recommend that fine chinaware or crystal items be hand washed. • Do not jam the glassware items together when loading. • Place delicate items on the upper rack. • Do not load tall dishware items near the middle spray arm. • Move racks slowly in and out to avoid slamming the dishware items together. • Make sure all dishware and glassware items are securely in place when loading to avoid falling over or striking against each other. Noise: Some of the sounds you will hear are normal. • You will hear the sound of the water fill and rinse. • You will hear the drain pump motor operation to pump water out. • You will hear the motor stopping at the end of the cycle. • If some utensils are not secure in the rack, you will hear that they are being tossed around the tub. Oversudsing: This is due to the use of regular hand washing detergent. Detergent should be for "Automatic Dishwasher Use". You must use the proper detergent for best dishwashing results. Dishware Odor: • This is due to an incomplete cycle. You need to allow the cycle to be fully completed. • New scented detergent used. This is normal because different types of detergents may have different fragrances. 27