Haier HDT18PA User Manual - Page 18

GB Troubleshooting: Dishwasher does not work: Check if the unit is plugged in. The plug may have come loose. Check if the electrical wall receptacle is of proper voltage. Check if circuit breaker needs to be reset or if the fuse needs to be replaced. Check if the unit is on "Off" mode. Check if the door is open. You may have to close the door properly. Dishware and glassware/flatware are cloudy and not cleaned: Use of old or poor detergent. You need to make sure that detergent is fresh. The water may be hard in your area. You may need to install water softener. Spray arms may be blocked. You may need to rearrange dishware and utensils. Water pressure may be low. You may need to adjust the water pressure. Make sure it is between 20 to 120 (PSI). Water temperature may be lower than what is recommended. (120 Degree F / 49 Degree C) You may need to adjust water regulator. Overloading of dishware. You may need to rearrange or remove some dishware from the load. May have selected wrong cycle. You may need to select proper cycle. Dishes are not dry: Vented dry option is off. You need to check if vented dry option is "ON" position. Low water temperature. You may need to regulate water temperature to 120 Degree F / 49 Degree C. 17