Haier HMV1630DBBB HMV1630 Installation Guide - Page 9
Tools And Materials Needed, Mounting Space
View all Haier HMV1630DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EEnnglisshh TOOLS AND MATERIALS NEEDED # 1 Phillips screwdriver Pencil Ruler or tape measure and straight edge Carpenter square (optional) Tin snips (for cutting damper, if required) Gloves Scissors (to cut template, if necessary) Electric drill with 3⁄16", 1⁄2" and 5⁄8" drill bits Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only) Saw (saber, hole or keyhole) Stud finder or Hammer (optional) Safety goggles Level Duct and masking tape MOUNTING SPACE Bottom Edge of Cabinet Needs to 161⁄2" (41.9 cm) be 30ʺ (76.2 cm) or More from the Cooking Surface 30"(76.2 cm) 30" (76.2 cm) 2" (5.1 cm) min. Backsplash 66ʺ (167.6 cm) or More from the Floor to the Top of the Microwave NOTES: t5IFTQBDFCFUXFFOUIFDBCJOFUTNVTUCFi DN XJEFBOEGSFFPGPCTUSVDUJPOT t*GZPVBSFHPJOHUPWFOUZPVSNJDSPXBWFPWFOUPUIFPVUTJEF TFF)PPE&YIBVTU Section for exhaust duct preparation. t8IFOJOTUBMMJOHUIFNJDSPXBWFPWFOCFOFBUITNPPUI GMBUDBCJOFUT CFDBSFGVMUP follow the instructions on the top cabinet template for power cord clearance. 8