Haier HRF10WNDWW User Manual - Page 7

Install Limitations, Door Alignment, Reversing the Door Swing

Get Haier HRF10WNDWW PDF manuals and user guides
UPC - 688057304892
View all Haier HRF10WNDWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

English Install Limitations • Do not install your refrigerator in any location not properly insulated or heated e.g. garage etc. Your refrigerator was not designed to operate in temperature settings below 55˚ Fahrenheit. • Select a suitable location for the refrigerator on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located on the front bottom corners of the refrigerator. Door Alignment (see fig. 1) 1. Remove hinge cover screw. 2. Remove top hinge cover. 3. Loosen the top hinge screws using a phillips head screwdriver. 4. Adust the door and then tighten the screws. 5. Replace the top hinge cover. Reversing the Door Swing (see fig. 1 to fig. 4) Left/right door opening method: This product provides the reversing of the left/right door opening. You can select your preference of door opening by following the procedure to make the change. fig. 1 hinge cover top hinge 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
English
Install Limitations
•
Do not install your refrigerator in any location not properly insulated or heated
e.g. garage etc. Your refrigerator was not designed to operate in temperature
settings below 55˚ Fahrenheit.
•
Select a suitable location for the refrigerator on a hard even surface away from
direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc. Any floor unevenness should be corrected with the leveling legs
located on the front bottom corners of the refrigerator.
Door Alignment
(see fig. 1)
1.
Remove hinge cover screw.
2.
Remove top hinge cover.
3.
Loosen the top hinge screws using a phillips head screwdriver.
4.
Adust the door and then tighten the screws.
5.
Replace the top hinge cover.
Reversing the Door Swing
(see fig. 1 to fig. 4)
Left/right door opening method:
This product provides the reversing of the left/right door opening. You can select
your preference of door opening by following the procedure to make the change.
fig. 1
hinge cover
top hinge
6