Haier HRQ16N3BGS Use and Care Manual - Page 12
Lights, Vacation And Moving Care, Reinstalling/using, Refrigerator Again
View all Haier HRQ16N3BGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
NOTE: When cleaning stainless steel, always wipe in the direction of the grain to avoid cross-grain scratching. 4. Plug in refrigerator or reconnect power. LIGHTS The interior lights of the refrigerator turn off when the doors are open for more than 7 minutes. IMPORTANT: Your refrigerator is equipped with LED lighting. These lights are designed to last for the life of your refrigerator. However, if the lights stop operating, please contact a qualified technician for replacement. VACATION AND MOVING CARE VACATION If You Choose to Leave the Refrigerator On While You're Away: 1. Use up any perishables and freeze other items. If You Choose to Turn Off the Refrigerator Before You Leave: 1. Remove all food from the refrigerator and freezer. 2. Unplug refrigerator or disconnect power. 3. Clean refrigerator, wipe it, and dry well. 4. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up. MOVING WARNING WARNING Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. 1. Remove all food from the refrigerator and pack all frozen food in dry ice. 2. Unplug refrigerator. 3. Clean, wipe, and dry thoroughly. 4. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move. 5. Raise the leveling legs so they don't scrape the floor. See "Leveling." 6. Tape the doors closed and tape the power cord to the back of the refrigerator. When you get to your new home, put everything back and refer to the "Installation Instructions" section for preparation instructions. REINSTALLING/USING REFRIGERATOR AGAIN If the refrigerator has been placed in a horizontal or tilted position for any period of time wait 2 to 5 hours before plugging it in to allow the oil to settle into the compressor. 1. Clean refrigerator. See "Cleaning." 2. Place refrigerator in desired location and level. See "Installation Instructions." WARNING Fire or Explosion Hazard Do not puncture refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used. Failure to do so can result in death, explosion or re. IMPORTANT: Handle with care when moving refrigerator to avoid either damaging the refrigerant tubing or increasing the risk of a leak. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. Failure to do so can result in death, re or electrical shock. 3. Plug into grounded 3 prong outlet. 10