Haier HWF05XC7-E User Manual - Page 14

WLOINCDAOTWING UNIT IN Open the window and mark center line on the center of the inner sill. INNER SI_ INDOOR SIDE J AATNTGALCEH 8ASEPAN Install the basepan angle behind the inner windowsill, with the shod side of basepan angle as shown, Use the 2 shod screws 13/32' provided. The basepan angle helps 1o hold unil securely in place. Be sure to place basepan angle edge flush against back of inner sill. INNER SILL SHORT SCREW13/32' ©L [ENTER LINE |HS|DE SHORT SIDE OUTSiDE BASEPAN ANGLE IINNSTTHAELLWTINHDEOAWIR CONDITIONER Carefully lift the air conditioner and slide it into the open window. Make sure the bosom guide of the air conditioner drops into the notches of the basepan angle. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air condilionen WINDOW UPPER GUIDE BOTTOM GUIDE BASEPAN ANGLE ABOUT 1/4 'l r IANNSDTASLALSTHHLEOSCEKALGASKET BASEPAN ANGLE Extend the side cudains to fill the window opening using 4 wood screws 31/32' to secure them, Cut the seal gasket to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from geffing into the room. Fasten the basepan angle, using a shod screw 13/32'. SHORT SCREW13 WOOD SCREW31 WINDOW SEAL GASKET 13