Haier HWF05XC7-E User Manual - Page 9
Caution
View all Haier HWF05XC7-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
After installing your air conditioner, plug it into the proper electrical outlet in the wall. POWER Turns air conditioner off. SPEED "LOW" Low speed fan operation with optional cooling. SPEED "Hi" High speed fan operation with optional cooling. This automatically controls the temperature of indoor air. Turn the knob so that the arrow points to the cooler marks for more moderate cooling. Normal Fan 1. Turn the SPEEDmode switch to the "Hi" or the %OW" setting. 2. Set the thermostat contrd to the temperature mark "FAN ONLY". Normal cooling 1. Turn the SPEEDmode switch to the "Hi" or the "LOW" setting. 2. Set the thermostat control to the desired temperature.(The mid-point is a good starting position.) if the room temperature is not satisfactory after a reasonable time, adjust the contrd to a warmer setting, as appropriate. Maximum cooling 1. Turn the SPEEDmode switch to the "HI" setting 2. Set the thermostat contrd to the MAX COOL temperature mark. Quieter operation 1. Turn the SPEEDmode switch to the "LOW" setting. 2. Set the thermostat control as needed. CAUTION: 1) Remember the compressor of your air conditioner will not work when the temperature goes below 65°F. 2) When you shut off the air conditioner wait for 3 minutes before turning it on again. This is the compressor cycle time. 3) If you have any trouble in operating your air conditioner, please refer to the Trouble Shooting section.