Haier HWF05XCA User Manual - Page 14

Storm w_ndow instoHat_on PWRINEDPOARWFOE R Ufstorm window frame does not allow iNSTALLATiON adequate clearance below sill (I/2" required}, remove storm window hspect window track_ sash, and sill for its abiUit'ito support the weight of air conditionen frame or create clearance by adding a wood strip (at least 1 1/2" wide) along entire width of siJJ Fasten Measure width between wndow wood slrip to sill with at least three countersunk wood screws (not readings to ensure UnstanMt ount supplied with kit) This provides a will fit window frame UnstanMi ount smooth surface for mounting air mode)s are designed for windows conditioner: 1/2" (the detail see page 12) UnstonMt ount kit supp)ied with unit is designed for mounting in most doubb_hung windows w_out _torm w_r_dows. For instoHation in window frame with storm window, modify sill by adding wood strips to inner and outer sills This raises unit and eUiminatesinterference of storm window frame Mobile home window instomr_tion Add wood strip (at least 1 1/2" wide) along entire width of window siJJ Thickness of wood strip should match height of front lip on window frame Fasten wood strip to sill with a minimum of _flree countersunk wood screws (not supplied with kit) This provides a smooth surface for mounting air conditionen Mustbe a minimum oFI/2" to dea_ botlom rail onuni_ T o i iWNISNTDAOLWL UNiT iN Place unit in window Lower sash until it rests behind front flange of top rail Bottom rail must rest behind window sill with a level adiust unit to a ]/2 bubble slope to the rear for proper wa]er drainage fLevd iBNASSTEAPLALN ANGLE Back front attachment screw out several turns and slip BasepanAngle over screw head Snug screw with angle resting on window ledge UnstolTl wo 31/32 '_screws through angle into window ledge Repeat for opposite side o Curtain assembly cut away for darity 31/32' screws Basepal angle 13