Haier L26K3 User Manual - Page 18
H.LOCK, Setting
View all Haier L26K3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Basic Receiving and Playing Operations items. (Off/CC1/CC2/CC3/CC4fText1fText2fText3fText4.) TEXT: The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. DNR (Digital Noise Reduction): Press VOL+/- to set On or Off. Adjust Menu The TV can be used as a display, and you may adjust relevant settings.The operating method of various menus is the same as that described for TV signal.The following are operating methods that different from that for TV signal. When the TV is used as a display, you may set and adjust its picture effect by the following steps. Press INPUT to switch the signal input to PC mode. Press MENU to display the screen main menu, and then press VOL+/- to select the Adjust menu as shown in the below figure. 0 H-Position V-Position Clock Phase Auto Adjust Color Temp. Adjust ► O 50 I 50 50 50 Move Ivoti-I Adjust Exit El Press CH+/- to select the option to be adjusted. El Press VOL+/- to adjust it. H-Position Horizontal position of picture can be adjusted in this item. V-Position Vertical position of picture can be adjusted in this item. Clock This is used for adjusting H Position and V Position as well as relative parameters in PC modes. 0 Phase This is used for adjusting the phase of pixel clock in PC mode. Auto Adjust Vertical and Horizontal position of picture can be adjusted in this item. 0 Color Temp. Adjust the color temperature. H.LOCK Setting The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. YAAYAYA AY Change Password Prog. Set On Channel Source Lock Child Lock Channel Lock Max Volume On Volume Unlock Off ► 2 ► Unlocked ► Off ► Off ► How to use the password function Press H. LOCK, the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys; if the password is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter a password again. If there is no operation for a few seconds, the display will automatically disappear. To set new password After entering the Lock Set menu, press VOL+/- to display the Change Password menu, afterwards enter a new 4-digit password by pressing numerical keys and repeat entering this password once, and finally select the option to be confirmed and press MENU to confirm, indicating the successful change of password. If the user does not want to change the password in halfway, he may press MENU to exit from this menu. & Note The initial password is 0000, and the password setting will not be changed after executing the Unlock option. 0 Prog. Set Preset Source may be set as Off, TV, AV1, AV2, S-Video, 18 TFT-LCD television Owner's Manual