Haier LSE-1200 Instruction Manual - Page 7
Maintenance, Installation - lse 1200s
View all Haier LSE-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Maintenance 5. Rinse intake pipe joint and the inlet valve gauze filter frequently in case foreign substances in water blocks the water pipe connection. 6. Reinstall the shakeproof components that are dismantled when moving the house(including bolt,gum sleeve,shakeproof cell type basin,etc.) according to the following direction. Tighten the inner components in case they are shaken and destroyed. Dismantlethe cover plate Fit on the shakeproof in the back and take down cell type steel,and insert 3 splash shield plastic plugs. the packaging screw. Fix the rubber sleeving to the packaging screw from the interior of the rear cover plate. Tighten the packaging Screw tight the rear cover plate. screw with a spanner. 7. When the equipment has not been used for a long time, disconnect the power supply and turn off the tap. Keep the door of the machine open to let out the smell. If the machine is not in use temporarily, keep the door slightly open. Installation Remove all the packing materials (including the EPS base)to prevent vibration during use, as shown in the right picture.Upon opening of the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water test in the factory. Check attachments and materials with reference to the following Qty Name Operation Quality Water Drainage Warrantly Plastic manual certificate hose holder card plugs Model Quality certificate Drainage holder Warrantly card LSE-1200 S 1 12 1 1 3 Plastic plugs Water hose Operation manual Fig. 1 Dismantle the packing bolts as shown in Fig. 2. The packing bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. Before use: 1. Remove the back plate; 2. Remove the three packing bolts on the back plate and take out the rubber hose; 3. Replace the back plate; 4. Fill the holes left by the packing bolts with plastic plugs. (Attention: The packing bolts and rubber hose should be kept in a safe place for later use) Adjusting the washing machine There are adjustable feet under the bottom of the washing machine. Before use, the washing machine should be adjusted, as shown in Fig. 3, so that it is level. Fig.2 Fig.3