Haier LY22T1CBW User Manual - Page 16

Menu Operations NOTE: Using your remote control to navigate in the on-screen menus. The on-screen menus shown in this manual may be different from those on your TV. These are example to illustrate your TVs operation. Picture Menu Options Picture quality can be adjusted for any input separately . The picture quality on the screen can be adjusted as follows: 1. Press MENU button and / until the picture menu appears on the screen. 2. Press / button to enter the picture menu and go up and down to select the desired option . 3.Press / button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Functions: Video Mode: Press / to set the picture mode . Contrast : Used to set the contrast balance of the picture. Brightness : Used to set the brightness level of the picture. Colour : Press / to adjust the colour saturation of the picture.. Sharpness : By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother. Tint(Only available in NTSC): Set the colour tone of the picture. Colour Temperature : Press to select the colour temperature from Normal/Cool/ Warm . Noise Reduction: Adjust the quality of the picture by selecting Off,Low, Middle,High. PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button to enter the submenu. Press / to adjust the value. PICTURE Auto Sync H.Position 50 V.Position 50 Size 0 Phase 50 EXIT MENU OK