Haier LY22T1CBW User Manual - Page 32

DVD System Setup DVD System Setup SETUP PLAY OK General Setup Process 1.Press the SETUP button, the General Setup Page, Preference Page will be displayed in turn. 2.Press CH+o/r- b to select, the item, then press to enter the submenu. 3.Press CH+o/r- bu to select then press OK to confirm. 4.Press SETUP repeatedly to exit the set-up menus. ..General Setup Page.. Tv Display 4:3 LB 4 3/.Ps Angle Mark On 4 3/.Lb Osd Lang ENG 16 9 Caption On Screen Saver Off ..Preference Page.. TV Type Parental Password Default Auto PAL AUTO NTSC SETUP PLAY OK General Setup Page ASPECT RATIO DESCRIPTION When using the DVD with the internal TV, select 4 3/LB. The following information applies only when the DVD output is connected to an external TV. ..General Setup Page.. Tv Display 4:3 LB 4 3/.Ps Angle Mark On 4 3/.Lb OSD Lang ENG 16 9 Caption On 4 3/PS (PS = Pan and Scan) Screen Saver Off You may select this if you have a normal Hdcd Off aspect ratio (4:3) TV, although the NORMAL Last Memory On /LB (letter box) is a more common choice. In PS mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4 3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. 16 9 You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.