Hamilton Beach 53155 Use & Care - Page 9
Troubleshooting - blender gasket
UPC - 040094531554
View all Hamilton Beach 53155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
840156401 nv04.qxd 11/7/07 1:39 PM Page 9 Troubleshooting PROBLEM Blender leaks. Ice not crushed. Does not blend well. Does not dispense or dispenses slowly. Dispenser leaks. Cannot remove cutting assembly. PROBABLE CAUSE/SOLUTION • Tighten cutting assembly on jar. • Make sure gasket is not damaged. If damaged, please call our toll-free customer service number to order a replacement. • Make sure lid with filler cap is pushed down tightly on jar. • See ice crushing instructions in "Blending Specific Foods" section. • Make sure enough liquid has been added. If mixture is too thick, continue to add liquid until mixture is blended to desired consistencey. A minimum of 8 ounces (250 ml) is recommended. • Do not try to mash potatoes, mix stiff dough, whip egg whites, grind raw meat, or extract juices from fruits and vegetables. The blender is not made to perform these tasks. • Make sure blender is ON and dispenser lever is in the DOWN position. • If solid food or ultra-thick beverage will not dispense, pour from jar. • Make sure seal rings are in place on dispenser lever and spout. • Make sure dispenser lever is in the UP position. • Loosen cutting assembly by holding jar and turning cutting assembly counterclockwise. 9