Hannspree SK42TMNB User Manual - Page 9
Foot Stand Installation, Disconnecting the Stand, Using the Cable Organizer - lcd tv
View all Hannspree SK42TMNB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Foot Stand Installation 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. n Install only with another person's assistance. n Make sure to distinguish between the front and back of the stand when assembling them. 2 Attach the foot stand as shown in the illustration and secure it with the four included screws. Please fasten with a cross screw driver. Y Pb/Cb Pr/Cr L R SCART COMPONENT VGA SPDIF HDMI 2 AVUGDAIO CABLDET/AVN/TTVENNA OMPONENT Disconnecting the Stand 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws and detach the stand from the TV. R SCART VGA COMPONENT L VAGUADIO R SCART VGA COMPONENT L VAGUADIO Pr/Cr Y Pb/Cb SPDIF HDMI 2 CABDLTEV//ATVNTENNA Using the Cable Organizer Route the cables through the cable clamp as shown in the illustration below: AUDI 1 Y Pb/Cb Pr/Cr L SPDIF HDMI 2 R SCART COMPONENT VGA AVUGDAIO CABLDET/AVN/TTVENNA 2 3 SCART COMPONENT VGA AVUGDAI Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper mounting or mounting that results in accident or injuiry. You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall. 6