Harman Kardon 44 Owners Manual - Page 4
Service
View all Harman Kardon 44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
form (left and right front channels will be duplicated at the back outputs of the 44 + ). The "mode" switch on your amplifier or receiver must be used for correct playback control of these formats. 2. STEREO/MATRIX will pass all signals through the 44 + in their basic two-channel form. Presence of a CD-4 carrier will not activate the demodulation circuitry or the LED indicator. Again, your "mode" switch must be used to control the playback format. 3. BYPASS directs the signal from your turntable or record changer immediately into the normal phono inputs of your amplifier or receiver, without processing by the 44 + . The result is the same as having your turntable connected directly to your amplifier or receiver, thus allowing playback of stereo or matrix discs without activating the 44+. This function can be used even when there is no power supplied to the 44 + . harman kardon 44 -f CO-4 AUTO POWER ON POWER JNC.2.71ON SIEPEO/mArPtx • CO-4 At:7C • BYPASS e 00-4 DevIODULATOP AN IMPORTANT NOTE ABOUT FUSING AND THE TOP COVER: The 44+ is an active device and requires AC power. A fuse is provided on the back panel to protect the 44+ from unusual fluctuations in current drawn through the AC line. If this fuse ever needs replace. ment, use only a fuse of the same value-never one larger. Use of a fuse with greater current capacity will expose the 44 + to severe electrical damage and may otherwise be dangerous. Removing the top cover of the 44 while it is connected to an AC receptacle exposes you to a severe shock hazard. There are no parts inside the 44 + that you can adjust to improve or alter its performance. Do not handle an open 44 + while it is connected to AC power. Service We have a Customer Service Department ready to help you with any questions or problems that may arise concerning the installation or operation of your unit. You can write us at: Harman / K a rdon, Incorporated 55 Ames Court Plainview, New York 11803 We promise to be as prompt and complete as possible in our response. If your problem cannot be resolved through an exchange of correspondence, we may refer you to one of our authorized warranty repair stations (let us know what major city is closest to you so we can suggest one convenient for you), or authorize the return of your unit directly to the factory. If your unit must return to the factory we will send you an authorization form, packing instructions, and a label which will identify your unit during its processing and ensure its return to you without delay. NO UNIT SHOULD BE SHIPPED TO THE FACTORY WITHOUT PRIOR AUTHORIZATION.