Harman Kardon ABH 4 Owners Manual
Harman Kardon ABH 4 Manual
 |
View all Harman Kardon ABH 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harman Kardon ABH 4 manual content summary:
- Harman Kardon ABH 4 | Owners Manual - Page 1
ABH 4 4-Room A-BUS® Expansion Hub ® ® Power for the Digital Revolution.® Power for the Digital Revolution.® - Harman Kardon ABH 4 | Owners Manual - Page 2
dust and dirt. Your new Harman Kardon ABH 4 A-BUS Expansion Hub has been customdesigned for use with A-BUS products. Do not connect the RJ-45 jacks to any other device. Make sure to follow all instructions when preparing wiring for use with the ABH 4 Expansion Hub and associated equipment. Failure - Harman Kardon ABH 4 | Owners Manual - Page 3
system source that feeds the A-BUS modules used with this ABH 4. In most applications, the connection will be to the A-BUS output on a Harman Kardon A-BUS/READY receiver, although the input may also come from the Expansion Out Jack ∞ of another ABH 4 when multiple hubs are in use. In all cases, the - Harman Kardon ABH 4 | Owners Manual - Page 4
BUS/READY Harman Kardon receiver, the ABH 4 provides the power that enables up to four remote rooms to be equipped with A-BUS modules such as the Harman Kardon AB 1, with more room installations possible through the use of additional ABH 4 hubs. • The ABH to properly support the weight of the ABH 4, - Harman Kardon ABH 4 | Owners Manual - Page 5
READY product, use the supplied RJ-45 jumper cable to connect the A-BUS jack on the receiver to the "Expansion In" jack on the ABH 4. ABH 4 power supply Optional AB 1 A-BUS modules connected by Cat. 5 cabling FL 8385 Source component with optional IR emitter placed over IR sensor 123 PLAY/PAUSE - Harman Kardon ABH 4 | Owners Manual - Page 6
room modules to the A-BUS Outputs • on the ABH 4. Make certain that the connector is wired in accordance with the standard TIA 568A color-coding. Connect the A-BUS modules in the remote rooms to the cable in accordance with the instructions In" jacks on products by Harman Kardon and wish to control a - Harman Kardon ABH 4 | Owners Manual - Page 7
, connect either the Multiroom outputs (if available) or the Tape outputs to the Audio Input ¢ jacks on the ABH 4. Optional 12V power supply ABH 4 power supply Optional AB 1 A-BUS modules connected by Cat. 5 cabling Connect to either the Multiroom or the Tape outputs, but not both. Optional - Harman Kardon ABH 4 | Owners Manual - Page 8
) • Check the audio connections between the ABH 4 and the host receiver (non-A-BUS/READY systems) For additional troubleshooting information and updated operational and installation hints, please visit the Product Support section of the Harman Kardon Web site at www.harmankardon.com. Specifications - Harman Kardon ABH 4 | Owners Manual - Page 9
, Incorporated. All rights reserved. Printed 3/05 Part No. ABO 42hl Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. A-BUS and A-BUS/READY are registered trademarks of LeisureTech Electronics Pty Ltd. Australia. All
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
ABH 4
4-Room A-BUS
®
Expansion Hub
Power for the Digital Revolution
®
Power for the Digital Revolution
.
®