Harman Kardon AVR 8000 Owners Manual - Page 27
Volume Up Button, Set Button, Buttons, OSD Button
View all Harman Kardon AVR 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
System Configuration As indicated in the menu, when you start the process a special test tone will be heard through the subwoofer or front/left right speakers, depending on your system's configuration. Press the Volume Up Button 42 until the sound from the subwoofer or front speakers' low-frequency drivers sounds distorted or crackly. At that point IMMEDIATELY press the Set Button o. At this point the maximum setting will be entered and the test noise will stop. Press the ⁄/¤ Buttons mp so that the on-screen › cursor is next to BACK TO MASTER MENU. Press the Set Button o to return to the MASTER MENU. When all settings and adjustments have been made, press the OSD Button v to return to normal operation of the AVR. Once the settings outlined on the previous pages have been made, the AVR 8000 is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to listen to a variety of sources and different kinds of program material. These advanced settings are described on pages 36 to 37 of this manual. In addition, any of the settings made in the initial configuration of the unit may be changed at any time. As you add new or different sources or speakers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown in this section. Having completed the setup and configuration process for your AVR 8000, you are about to experience the finest in music and home theater listening. Enjoy! 27 SYSTEM CONFIGURATION