Harman Kardon FESTIVAL 3 Owners Manual - Page 8
Connecting, Antenna, Proper, Things, Watch
View all Harman Kardon FESTIVAL 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CONNECTING THE AM ANTENNA FM 300 AM ANTENNA The AM loopstick antenna built internally within your FESTIVAL 3 comprises all the antenna usually required for normal signal areas. In more remote locations an additional outdoor antenna may he required. This should consist of a signal wire, as long as is reasonably practical. It must he kept away from large metal objects, power lines or electrical machinery to insure reception without extraneous noise. Attach this length of wire to the AM terminal of the ANTENNA terminal strip. THE PROPER ANTENNA TO USE If you live in a metropolitan area, or if you wish to receive signals from many directions, an ordinary crossed dipole, conical or three element in-line antenna could serve adequately. The three or four element in-line (uni-directional) type is the most satisfactory of the group, but due to its high directivity, it becomes necessary to include an antenna rotator to change the direction of the antenna for best reception. For near-fringe and fringe reception, a six-to-eight-element logperiodic or Yagi is recommended. Both types are excellent and offer superior front-to-back ratio (ratio of forward pickup to that at the rear), greater gain and rejection of noise. Both types are highly directional and require a rotator. Far fringe reception requires an antenna with eight or ten elements. This type antenna is usually quite heavy and requires extra support and bracing, when in- stalled. Remember, FM stereo reception requires greater gain than standard monophonic FM. It is, therefore, advisable to always purchase the antenna which can "pull in" a station with the greatest gain and lowest possible noise. THINGS TO WATCH OUT FOR Are there high-rise buildings in your area? Water towers? Gas tanks? Mountains? They can all cause serious reception problems by reflecting FM signals which, when received, will result in audible distortion. This form of distortion is known as multipath interference (more than one signal reaching your receiver a split second apart), which is quite similar to "ghosts" on your TV set. Multipath interference can be reduced or eliminated by purchasing a highly directional antenna with a rotator. Proper orientation of the antenna may tune out multipath completely, or alternate it below audibility. HOUSE ANTENNA C")