Harman Kardon HK330I Owners Manual - Page 5
®muting
View all Harman Kardon HK330I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FIALAILI SCfAL ()SIGNAL INDICATOR (FM/AM SIGNAL STRENGTH) The receiving signal levels are indicated by 3 LEDs. The better the selected station is tuned in, the more LEDs light up. Adjust with the TUNING knob. TAPE MONITOR INDICATOR (monitor) This indicator illuminates when the TAPE MONITOR switch is pressed to monitor the tape sound. ®CENTER TUNED INDICATOR (center tuned) A green light is turned on when an FM station is correctly tuned in. It may not light up when a weak station is tuned in. ()FM STEREO INDICATOR (stereo fm) This indicator is illuminated when the FM stereo broadcasting station is tuned in. el TUNING KNOB This knob is used to search for a broadcasting station. Turn the knob, looking at the SIGNAL INDICATOR to tune in to the desired station. ®MUTING SWITCH (fm muting) This switch functions to eliminate irritating interstation noises when the FM reception is being scanned for a station. To tune is to a weak station, press this switch down to invalidate the muting function. 45 AUDIO MODE SELECTOR (audio mode) This selector is used for the composition of sounds. Usually it is set at the stereo position ( A. stereo/ .E. mono), but when it is set at "mono", sounds from the two channels are combined into a monaural reproduction. If the FM stereo broadcasting station you are listening to is weak and there is a lot of noise, set this switch at "mono". The sound becomes monaural, but the noise is reduced for more comfortable listening. (g) FUNCTION SELECTORS (FUNCTION) PHONO switch (phono): Press this switch to listen to a disc played on the turntable. AUX/DAD switch (aux/DAD): Press this switch to listen to the program source connected to the AUX/ DAD INPUT terminals. AM switch (am): Press this switch to listen to an AM broadcasting program. FM switch (fm): Press this switch to listen to an FM broadcasting program. ID TAPE MONITOR SWITCH (TAPE monitor) This switch is used for reproducing sounds with a tape or monitoring the sound during recording. The TAPE MONITOR INDICATOR lights up red when the switch is pressed down, indicating for reproduction by tape or monitoring the sound during recording. 5