Harman Kardon MAS 102 CD Player and Amplifier Owners Manual - Page 7

ENGLISH mas system 2 Rear-panel connections Amplifier 0 1 0 0 Right and Left Speaker Output Terminals: Use two-conductor speaker wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and negative connections). 1 Input From Controller: Connect the included ribbon cable to this connector and to the corresponding connector on the MAS controller. This cable passes audio signals from the controller to the amplifier, and it transfers AC power from the amplifier to the controller. If this cable is ever damaged, do not use it, and contact Harman Kardon, for a replacement. 2 AC Power Input: After you have made all other connections, plug the AC power cord into this receptacle and into an unswitched wall outlet. NOTE: MAS 101/MAS 111 require 230V, 50/60Hz AC current. MAS 102 requires 120V, 60Hz AC current. 7