Hayward HeatPro® Heat Pro All Models - Page 5

Analog Thermostat Approx. 83°F 105°F 60°F Power Indicator Light: Shows that proper power is supplied. Heater Indicator Light: Shows the unit is operating normally and the thermostat is making a demand for heat. Temperature Control Knob: Adjust knob to desired range, using the diagram on the left as a guide. The thermostat has a temperature range from 60°F - 105°F(approx. ± 5° at the mid point.) Once you have the dial is set to the preferred temperature, the unit will achieve and maintain this temperature. For help with this type of control, refer to the troubleshooting guide. Single Mechanical Thermostat Approx. 83°F 60°F Power Indicator Light: Shows that power is supplied. 105°F Heat Indicator Light: Shows the unit is operating normally and the thermostat is making a demand for heat. Temperature Control Knob: Adjust knob to desired range, using the diagram above as a guide. The thermostat has a temperature range from 60°F - 105°F. Once the dial is set to a preferred temperature, the unit will achieve and maintain this temperature. ** The Single Mechanical Thermostat models do not turn off under 60 degrees F. This model was designed to come on automatically if your water temperature is below 60 degrees to prevent the pool from becoming excessively cool and creating long recovery times. If your application dictates the need to turn the heater off for extended periods of time, use the circuit breaker. For help with this type of control, refer to Troubleshooting Guide for MECHANICAL Thermostat Control in the back of the owner's manual. 4