HealthRider H500 Treadmill English Manual - Page 28
Whilst the incline is changing, re
View all HealthRider H500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
PROBLEM: The heart rate monitor does not function properly SOLUTION: a. If the heart rate monitor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on page 9. b. If the heart rate monitor still does not function properly, the battery should be changed. To replace the battery, first locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, and turn the cover counterclockwise to the "open" position. Then, remove the cover. b Battery Cover Next, remove the old battery from the sensor unit, and insert a new CR 2032 battery, with the battery oriented so the writing on top. Make sure that the rubber gasket is in place in the sensor unit. Then, reinsert the battery cover and turn it to the closed position. Battery Cover Battery Rubber Gasket PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. Whilst the incline is changing, remove the key. After a few seconds, reinsert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. 28