HealthRider Pro H250i Treadmill Chen Manual - Page 10

11. Tighten four Console Screws (67) into the Left and Right Uprights (70, 76) and the console as- 11 sembly. Start all four Screws and then tighten them; do not overtighten the Console Screws. See step 10. Tighten the six 3/4" Screws (23); do not overtighten the Screws. Console Assembly 67 67 76 70 12. Slide the Left Handrail Cover (68) against the console assembly. Attach the Left Handrail Cover with two Cover Screws (52); do not overtighten the Cover Screws. Attach the Right Handrail Cover (74) in the same way. 12 Console Assembly 68 52 74 13. Lower the Uprights (70, 76). 13 See the inset drawing. Push the Uprights (70, 76) sideways so that the treadmill Frame (26) is centered between the Uprights. Firmly tighten the Upright Bolts (84, 85) on each side of the treadmill. 70 52 Side View 70, 76 85 84 26 View From Above 26 76 10