HP 10/100 3Com 3c905C-TX HP 3COM LAN cards (D7522A, D7523A), User Guide - Page 10

Updating LAN-specific Fields in the HP PC, Utility

Page 10 highlights

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide Updating LAN-specific Fields in the HP PC Setup Utility Updating LAN-specific Fields in the HP PC Setup Utility You need to check that the BIOS is configured to use your network card's features. To do this, use the HP PC Setup utility. Starting the HP PC 1 Setup Utility 2 Restart the PC. Press F2 when F2=Setup is displayed on the screen during startup. The opening window of the HP PC Setup utility is displayed. Which Fields Need You need to check, and update if necessary, all the fields that are Updating? LAN-related. On some PCs you may need to enable the LAN features. Enable Plug-and- If you are using Windows 95 SR2 or Windows 98 you need to ensure Play for Windows that the Plug-and-Play Operating System setting of the BIOS is 95 and Windows enabled. If the Main menu has Running Windows 95, Plug and Play OS or 98 another item to select the operating system, set it to Yes or Enabled. Disable Plug-and- If you are using Windows NT 4.0 you need to ensure that the Plug- Play for Windows and-Play Operating System setting of the BIOS is disabled. If the NT 4.0 Main menu has Running Windows 95, Plug and Play OS or another item to select the operating system, set it to No or Other. Update the LAN Settings Configure any Setup settings for the LAN interface using the following information as a guide. The names used in your version of the Setup program may be different to those shown. If you want to boot from the network ( "Frequently Asked Questions" on page 18): • Check that Security § Boot Devices Security § Start from Network is enabled. • Change the boot order so that Network appears first (Advanced § Advanced CMOS Setup § 1st Boot Device ). If you want to wake-up your PC from the network: • Check that the PC can be woken from the network (Power § Suspend Wakeup § Network [Enabled]). If you want to power-on your PC from the network: • Check that the PC can be powered-on from the network (Power § Power-On § Network [Enabled]). 10 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
Updating LAN-specific Fields in the HP PC Setup Utility
10 English
Updating LAN-specific Fields in the HP PC
Setup
Utility
You need to check that the BIOS is configured to use your network
card’s features. To do this, use the HP PC
Setup
utility.
Starting the HP PC
Setup
Utility
1
Restart the PC.
2
Press
F2
when
F2=Setup
is displayed on the screen during
startup. The opening window of the HP PC
Setup
utility is
displayed.
Which Fields Need
Updating?
You need to check, and update if necessary, all the fields that are
LAN-related. On some PCs you may need to enable the LAN
features.
Enable Plug-and-
Play for Windows
95 and Windows
98
If you are using Windows 95 SR2 or Windows 98 you need to ensure
that the Plug-and-Play Operating System setting of the BIOS is
enabled
. If the Main menu has
Running Windows 95
,
Plug and Play OS
or
another item to select the operating system, set it to
Yes
or
Enabled
.
Disable Plug-and-
Play for Windows
NT 4.0
If you are using Windows NT 4.0 you need to ensure that the Plug-
and-Play Operating System setting of the BIOS is
disabled
. If the
Main menu has
Running Windows 95
,
Plug and Play OS
or another item
to select the operating system, set it to
No
or
Other
.
Update the LAN
Settings
Configure any
Setup
settings for the LAN interface using the
following information as a guide. The names used in your version of
the
Setup
program may be different to those shown.
If you want to boot from the network ( “Frequently Asked
Questions” on page 18):
Check that
Security
Boot Devices Security
Start from Network
is
enabled.
Change the boot order so that Network appears first (
Advanced
Advanced CMOS Setup
1st Boot Device <Network>
).
If you want to wake-up your PC from the network:
Check that the PC can be woken from the network (
Power
Suspend Wakeup
Network
[
Enabled
]).
If you want to power-on your PC from the network:
Check that the PC can be powered-on from the network (
Power
Power-On
Network
[
Enabled
]).