HP 1606 FICON Administrator's Guide v6.4.0 (53-1001771-01, June 2010) - Page 48
The ports remain enabled or disabled after a switch reboot.
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3 Persistently enabling and disabling ports for CUP switch:admin> ficoncupset modereg ASM 1 Active=Saved Mode bit is set to 1. 5. Use the portEnable and portDisable commands to enable and disable ports as necessary. The ports remain enabled or disabled after a switch reboot. switch:admin> portenable 1/1 36 FICON Administrator's Guide 53-1001771-01
36
FICON Administrator’s Guide
53-1001771-01
Persistently enabling and disabling ports for CUP
3
switch:admin>
ficoncupset modereg ASM 1
Active=Saved Mode bit is set to 1.
5.
Use the
portEnable
and
portDisable
commands to enable and disable ports as necessary.
The ports remain enabled or disabled after a switch reboot.
switch:admin>
portenable 1/1