HP 1606 HP StorageWorks Fabric OS 6.3.2b Release Notes (5697-0777, November 20 - Page 51
Effective date, December 2010, HP StorageWorks Fabric OS 6.3.2b Release Notes
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Tape performance is degraded after a tape drive has been idle for a few hours and then traffic is restarted on an HP 1606 SAN Extension Switch. Fixed in Fabric OS 6.3.2b. Users are unable to create a Certificate Signing Request (CSR) on a switch with only an IPv6 address configured. Fixed in Fabric OS 6.3.2b. The output of the switchstatusshow command reports an invalid switch status rather than the "marginal" status when application blades go down. This is caused by the Fabric Watch blade handler monitor mishandling the status of application blades. Fixed in Fabric OS 6.3.2b. Fabric Watch reports TX/RX performance over 100% after executing the statsclear command. Workaround prior to upgrade: Use the slotstatsclear command instead of the statsclear command. Fixed in Fabric OS 6.3.2b. The LED for online trunked F_Ports goes from a steady green to off after Fixed in Fabric OS 6.3.2b. a code upgrade or hareboot/hafailover. For both portstats and SNMP MIB output commands, counters quickly wrap on GE_Ports of an HP 1606 SAN Extension Switch or an HP DC Fixed in Fabric OS 6.3.2b. SAN Director Multiprotocol Extension Blade. Effective date December 2010 HP StorageWorks Fabric OS 6.3.2b Release Notes 51