HP 2600fx HP SureStore 2600fx User's Guide - Page 15
SCSI ID switch - optical drive
View all HP 2600fx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
The following numbers correspond to the numbers in the drawing on the previous page. 1 Operation mode switch Used to choose the operating mode. Refer to "Setting the Operation Mode" in this section. 2 SCSI ID switch Used to set the SCSI ID. 3 Power connector Connection for power cord. 4 On/Off switch Used to switch power on or off. 5 SCSI connectors Two connectors that allow SCSI devices to be daisy-chained. If no other SCSI device exists on the chain after the optical drive, a terminator must be connected to the unused connector. 1-5
1-5
The following numbers correspond to the numbers in the drawing on the
previous page.
1
Operation mode switch
Used to choose the operating mode. Refer to
“Setting the Operation Mode” in this section.
2
SCSI ID switch
Used to set the SCSI ID.
3
Power connector
Connection for power cord.
4
On/Off switch
Used to switch power on or off.
5
SCSI connectors
Two connectors that allow SCSI devices to
be daisy-chained. If no other SCSI device ex-
ists on the chain after the optical drive, a ter-
minator must be connected to the unused
connector.