HP 2700n HP Color LaserJet 2700 - User Guide - Page 102
Control-panel message, Description, Recommended action, Non HP <color> installed
View all HP 2700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Control-panel message Load tray # Press OK Load tray # Load tray 1 Manual feed Press OK Memory is low Press OK Misprint Press OK No paper pickup Press OK Non HP installed Non HP supply in use Order cartridge Description Recommended action The printer is processing a manual-duplex job, and has printed the first sides. The printer waits for you to load the pages into the tray to print the second sides. Load the printed pages into the tray to print the second sides. See Using 2-sided (duplex) printing for more information. A tray is configured for the media type and size that the print job is requesting, but that tray is empty. Load the correct media into the tray, or press OK to use media in a different tray. No trays are configured for the media type and size that the print job is requesting. Load the correct media into tray 1, or press OK to use media in a different tray. The printer is set for manual feed mode. Press OK to clear the message and then load the correct media into tray 1. The printer memory is almost full. Print media has been delayed as it moves through the printer. Press OK to finish the job, or press X to cancel the job. Break the job into smaller jobs that contain fewer pages. For information about increasing the printer memory, see Working with memory. Press OK to clear the message. The print engine has failed to pick up a piece of media. In tray 1, verify that the media was inserted far enough into the tray. In tray 2 or optional tray 3, verify that the paper-length guide is in the correct position for the media size that you are using. Reload the media in the input tray and press OK to continue the job. If the message persists, contact HP support. See Service and support. A new, non-HP supply has been installed. This message appears until an HP supply is installed or you press OK. If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit. Service or repairs that are required as a result of using non-HP supplies are not covered under HP warranty. To continue printing, press OK. A non-HP supply is installed, and you If you believe you purchased an HP supply, pressed OK to override the error message. go to www.hp.com/go/anticounterfeit. Service or repairs that are required as a result of using non-HP supplies are not covered under HP warranty. The identified print cartridge is nearing the end of its useful life. Order the identified print cartridge. Printing will continue until Replace cartridge appears. See Supplies and accessories for more information. 92 Chapter 8 Problem solving ENWW