HP 3150 Service Manual - Page 42

Control panel messages These control panel messages are listed alphabetically, and are accompanied by the cause for the message and steps to take to resolve the problem. Table 9. Control panel messages Message Cause Solution (number) is a Group Group not Allowed The group-dial code you entered is assigned to a group, but a group cannot be dialed at this point. (Entries assigned as groups cannot be assigned into other groups.) Enter a different one-touch key or speed-dial code that is not assigned. Already in Group While programming a group-dial code, you tried to add a fax number that is already in the group. Continue by adding the next fax number you want to the group. Blacklisted (France only) The fax number you tried to dial has received a voice answer or no answer, was busy on the first dial and redials, or was busy with redials pending. To clear the blacklist, unplug the fax machine's power cord from the power strip or outlet and plug it back in. Busy The fax line to which you sent a fax was Check the fax number and try again to busy. The HP LaserJet 3100/3150 product send the fax. If the message appears automatically redials the busy line the again, try to send the fax to another fax number of times specified. machine or try again later. Cancel Group Edit ENTER to Confirm You pressed BACK SPACE while in a group- Press START to return to the group-dial dial code in the Group Dial Setup Menu. code and continue editing. Press ENTER/MENU to go to the Group Dial Setup Menu. (Press ENTER/MENU again to choose a different group-dial code.) Press STOP/CLEAR to exit the Menu settings. 40 Installation and operation EN